CDVI DIGIWAY PLUS, Руководство пользователя

Страница: 29 / 48

EN EN
DIGIWAY Plus
Inward or Outward Door Operator
29
26) 26)
Advanced Setting
Low Energy
Diameter (m)
|||||||||||||||||......................
1,2
The sw calculates the minimum opening/closing time when the malfunction mode is set at Low The sw calculates the minimum opening/closing time when the malfunction mode is set at Low
Energy, according to the doorset diameter (in m) and weight (in Kg). Energy, according to the doorset diameter (in m) and weight (in Kg).
27) 27)
Advanced Setting
Low Energy
Weight ( Kg )
|||||||||||||||||...................
120
Sets the doorset weight in Kg. Sets the doorset weight in Kg.
25) 25)
Advanced Setting
Test FTC-S Fail
STOP /
LOW ENERGY
In case of malfunction of the safety photocells FTC-S, it’s possible to set the operating mode: In case of malfunction of the safety photocells FTC-S, it’s possible to set the operating mode:
STOP / LOW ENERGY motion STOP / LOW ENERGY motion
NOTE1: NOTE1:
According to the Regulation, when activated the DISABLED PERSONS ACCESS [See According to the Regulation, when activated the DISABLED PERSONS ACCESS [See
configuration Menu]: configuration Menu]:
• • The min. Pause Time must be set at 5 Sec. The min. Pause Time must be set at 5 Sec.
• • The motor torque measured at the main closing edge must be lower then 67 N. The motor torque measured at the main closing edge must be lower then 67 N.
• • The min slow time time in closing must be 1,5 sec. The min slow time time in closing must be 1,5 sec.
These values can be set in the Main Functions menu. These values can be set in the Main Functions menu.
NOTE2: NOTE2:
When the Disabled Persons Mode is enabled, if the door is open through a C-NO command When the Disabled Persons Mode is enabled, if the door is open through a C-NO command
on inputs 15-16, it will reclose after the Pause Time on inputs 15-16, it will reclose after the Pause Time Extended. If the command comes Extended. If the command comes
from inputs (radar, push&go, remote control), the Pause time remains the regular one. from inputs (radar, push&go, remote control), the Pause time remains the regular one.
The Pause Time extended is The Pause Time extended is always always executed if the open command comes from the executed if the open command comes from the
button D of a remote control. button D of a remote control.
Warning: Disabled person access doors must be Warning: Disabled person access doors must be
identified with proper signage. identified with proper signage.
Disabled persons access settings Disabled persons access settings
Door lenght Door lenght
Door weight Door weight
50 Kg 50 Kg 60 Kg 60 Kg 70 Kg 70 Kg 80 Kg 80 Kg 90 Kg 90 Kg
750 mm 750 mm 3,0 s 3,0 s 3,1 s 3,1 s 3,2 s 3,2 s 3,3 s 3,3 s 3,5 s 3,5 s
850 mm 850 mm 3,1 s 3,1 s 3,1 s 3,1 s 3,2 s 3,2 s 3,4 s 3,4 s 3,6 s 3,6 s
1000 mm 1000 mm 3,2 s 3,2 s 3,4 s 3,4 s 3,7 s 3,7 s 4,0 s 4,0 s 4,2 s 4,2 s
1200 mm 1200 mm 3,8 s 3,8 s 4,2 s 4,2 s 4,5 s 4,5 s 4,8 s 4,8 s 5,1 s 5,1 s
If the operator is used for disabled persons access, adjust the opening and closing If the operator is used for disabled persons access, adjust the opening and closing
speed of the leaf for Low Energy setting. speed of the leaf for Low Energy setting.