CDR FOODLABFAT, Руководство оператора

Страница: 19 / 29

Operator’s manual
October 2012
19
4.7.2.2 Contrast
It is used to set up the contrast of LCD display.
As indicated on the first line of the display pressing the <left arrow> key the contrast
is decreased, pressing the <right arrow> key is increased. An indicator shows during
the adjustment of the contrast that assumes a proportional length to the intensity of
the contrast.
Press the <enter> key or the <menu> key to return to the menu mode.
Both keys confirm the new value of contrast inserted.
4.7.2.3 Time
It is used to adjust the time and date settings.
In this mode, the date or the hour that should be changed flashes and it is possible
to use the <up arrow> key to increase the time and the <down arrow> key to
decrease the time.
To make adjustments move the <left arrow> and the <right arrow> keys. Press the
<enter> key or the <menu> key to return to the menu mode.
Both keys confirm the new time.
If the operator does not press any key within 30 seconds, the instrument returns
automatically to the menu mode.
4.7.3 Auto start dialogue
In this mode it is possible to insert the time of automatic switching on of the
FOODLABfat instrument if it is connected to the mains and is ready for testing after
45 minutes.
On the screen are displayed the initials of the days of a week, the hour and the
minutes to power on. Using the <right/left arrow> key to select the position to be
modified. Using the <up/down arrow> key to select the day and to increase or
diminish the hourly values of automatic switching on. The minimum is 15 minutes. A
selected day will be market with the following sign ^ below the initial. Under Mode
the function can be set to on or off. Once having concluded the editing, press the
<enter> key or <menu> key to return to the menu mode.
4.7.4 Printer dialogue
Line feed and Header
After selection of Line feed you can press enter to effectuate a move of printer
paper for one line upwards. Use it for a replacement of paper.
In Header dialogue you can write a name of your laboratory or company which
should show on top of a result print out. 4 lines 20 figure each.
Set figures as shown beside the keys
Press Arrow up key for the edition of big figures.
Press Arrow down key for a deletion of a figure.