This document is the property of Tecora and can not be duplicated without permission
Ref : EN MU DSM 46 V2
Page 16 of 49
3.3
Pause during the sampling.
During the sampling it’s possible to pause the operation and perform some operations on the
instrument.
During the pause all the measures are stopped.
Attention: If the instrument is left in pause, the programmed samplings will not take place
and the instrument will stay in pause for an indefinite time.
•
Pressing the
Pause
key the following display appears :
3.3.1 Timed Sampling
In this menu it’s possible to modify the sampling Duration and
the Cycle (for sequential samplings).
Selecting STOP SAMPLING, the operation will be interrupted
manually.
3.3.2 Volumetric sampling
In this menu it’s possible to modify the Volume and the Cycle
(for sequential samplings).
Selecting STOP SAMPLING, the operation will be interrupted
manually.
! ATTENTION!
The instrument manages the power losses, turning off the instrument
will not stop a sampling since when turned on again it will restart the last sampling, it’s necessary
to select STOP SAMPLING from the PAUSE menu.
SAMPLING PAUSE
NEW DURATION
24:00
NEW CYCLE
24:00
STOP SAMPLING
RESTART
SAMPLING PAUSE
NEW VOLUME
150.00
NEW CYCLE
00:03
STOP SAMPLING
RESTART
