
44
The appliance must be connected to the electrical network verifying that the voltage corresponds
to the value indicated on the specifications plate and that the cables section of the electrical
wiring can bear the load which is indicated on the rating plate.
We recommend that the appliance is connected by a suitably qualified person who will comply
with the current IEE and local regulations.
It is recomended that the appliance is connected via a dedicated cooker circuit using a double pole
cooker switch with a rating equal or greater than the total loading of the cooker, with a minimum
opening between the contacts of 3 mm.
Alternative connection methods may be available as long as they conform to current IEE wiring
regulations.
The power supply cable must not touch the hot parts and must be positioned so that it does not
exceed 75°C at any point.
Once the cooker has been installed, the switch must always be easily accessible within 2 metres.
IMPORTANT: The appliance must be installed in accordance with the manufacturer’s
instructions. Incorrect installation, for which the manufacturer accepts no responsibility,
may cause damage to persons, animals and property.
The connection of the appliance to earth is mandatory. The manufacturer declines all
responsibility for any inconvenience resulting from the inobservance of this condition.
Before carrying out any work on the electrical parts of the appliance, the appliance must
be disconnected and locked off from the mains.
Electrical Installation
Содержание GB RV 701 SS
Страница 2: ...2...
Страница 24: ...24 S F C T A B T S Fig 13 Fig 12 Fig 16 Fig 15 Fig 14...
Страница 47: ...47...