26
REPlACING ThE hAlOGEN OVEN lIGhT
WARNING: Ensure the appliance is
switched off before replacing the
lamp to avoid the possibility of
electric shock.
•
Let the oven cavity and the
heating elements cool down.
•
Switch off the electrical supply.
•
Remove the protective cover
“
C
” (fig. 19).
•
Replace the halogen lamp “
B
”
with a new one suitable for
high temperatures having the
following specifications: 220-
240V or 230-240V, 50 Hz and
same power (check watt power
as stamped in the bulb itself) as
the replaced lamp.
IMPORTANT WARNING:
Never replace the lamp with
bare hands; contamination
from your fingers can cause
premature failure. Always use
a clean cloth or gloves.
•
Refit the protective cover “
C
”.
NOTE:
Oven bulb replacement is not
covered by your guarantee.
WRONG
CORRECT
B
C
Fig. 19
Inside of Oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water.
Suitable proprietary chemical cleaners may be used after first consulting with the manufacturers
recommendations and testing a small sample of the oven cavity. Abrasive cleaning agents or
scouring pads/cloths should not be used on the cavity surface.
NOTE:
The manufacturers of this appliance will accept no responsibility for damage caused by
chemical or abrasive cleaning.
let the oven cool down and pay special attention not to touch the hot heating elements
inside the oven cavity.
Содержание GB RV 701 SS
Страница 2: ...2...
Страница 24: ...24 S F C T A B T S Fig 13 Fig 12 Fig 16 Fig 15 Fig 14...
Страница 47: ...47...