36
Anti-Tilt Bracket
Important!
To restrain the appliance and prevent it tipping accidentally, the anti-tilt bracket supplied
must be fitted according to the instructions below.
To fit the anti-tilt bracket:
1.
After you have located where the cooker is to be positioned, mark on the wall and on the floor
the place where the four screws of the anti-tilt bracket have to be fitted.
Please follow the indications given in fig. 34.
2.
Drill four 8mm diameter holes for the fixing screws (two in the wall and two in the floor-see
fig. 34) and insert the plastic plugs supplied.
Important!
Before drilling the holes, check that you will not damage any pipes or electrical wires.
3.
Attach the anti-tilt bracket to the floor and rear wall using the four screws supplied, as shown
in fig. 34.
4.
After attaching the anti-tilt bracket securely, slide the cooker into place. Ensure that the rear
right foot slides under the bracket, as shown in fig.34.
=
=
Dotted line showing the position
of the cooker when installed
ANTI-TILT BRACKET
FIXING
Foot of
cooker
Anti-tilt
bracket
Fig. 34
Содержание GB RV 701 SS
Страница 2: ...2...
Страница 24: ...24 S F C T A B T S Fig 13 Fig 12 Fig 16 Fig 15 Fig 14...
Страница 47: ...47...