22
If the keys are (temporarily) responding incorrectly or not at all:
If the power supply to the extractor is cut and then restored, the
appliance will run an approximately 15 second diagnostic programme.
During this time the controls may not function properly.
If the speed indicators are flashing:
This is not a fault. After 30 hours of usage all speed indicators will
flash to signal that the grease filter needs to be cleaned. Press the
timer key to reset after cleaning.
If any of the potential resolutions in this guide do not resolve your
issue, please contact CDA Customer Care using the contact details
below.
Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012
F: 01949 862 003
W: www.cda.eu
