17
Securing the chimney sections
If you are ducting the extracted air
outside and/or fitting the chimney
sections, place the chimney
securing bracket (Fig. 11) at the
appropriate height. Mark the holes
for the screws with which the
bracket will be secured to the wall
(or ceiling - the bracket also offers
this option). Drill out the holes and
fit wall plugs. Secure the bracket to
the wall or ceiling and then raise the
inner chimney piece to the required height. Secure the inner chimney
piece to the chimney bracket using two small screws (Fig. 11).
Using the ‘T-piece’ for recirculation
If you are using the chimney sections but re-circulating the extracted
air through charcoal filters, then you will need to purchase and fit the
‘T-piece’ as per Fig. 12. This is
available from the CDA Sales
team under code RTP01.
If re-circulating, ensure that
the charcoal filters are fitted
as per page 8.
You can then fit the chimney
sections as per the above.
Fig. 11
Fig. 12
