Selecting your AFX CONTROL TYPE
.
With the
SETUP MENU
open, you can now choose the type of control type you want to
use with your AFX.
IMPORTANT NOTE :
As the AFX will restart and launch into the main application when
this procedure is completed, please refer to the
POWER ON SEQUENCE
section of this
User Guide to ensure that you have all necessary units powered correctly before
completing it. If you are using an
MMX
it must be active for all
CALIBRATION
steps.
The full description of each
AFX CONTROL TYPE
can be found in the
AFX CONTROL
TYPE DEFINITIONS
section of the
MENU REFERENCE GUIDE
so you should consult
that first to determine the correct one to choose for your particular system before
proceeding.
When you have determined which type to use, navigate to the
AFX Control Type
field
using the
B
button on the AFX unit and then press the
A
button to step through the
available options until the one you require is displayed.
To save this configuration, you should then press the
B
button to navigate to the
Restart
field and press the
A
button.
The preference will then be retained and used by the AFX until you choose to change it by
using the
SETUP MENU
to choose a different type.
The AFX will now restart and launch the main application.
AFX USER GUIDE
WWW.CDATEK.COM
6
GETTING STARTED
(continued)
