7
Operating Parts
Key
Two pieces of key are supplied together with
the motorcycle, where one piece should be
properly safekeeping for standby use.
Dash Board
Odometer (1)
For Record of all the running distance of this
motorcycle from putting into service.
Speed Meter (2)
For indication driving speed in Mile/h.
Tachometer (3)
The tachometer shows engine revolution in
rpm.
Fuel Level Gauge (4)
This shows the oil level in the oil tank in liter.
When the indicating hand of the oil level
gauge is fallen into the red range, please
immediately fill it with gasoline.
Milometer(5)
This is a kind of odometer may be cleared to
zero, which is installed within the odometer,
mainly used for recording distance of short -
distance driving or for calculation of oil
consumption.
Ignition Switch (6)
Designed with three positions:
(Off) position
All the circuits are disconnected and the key
may be removed.
(ON) position
All the ignition circuits are connected and the
engine may be started. Don’t press down the
key on this position.
Headlight on full beam (7)
When the headlight is on full beam position, the
pilot lamp is ON.
Shifting Pilot Lamp (8)
The number indicates the current shifting
position of this motorcycle. This only shows that
the lamp is ON on the NEUTRAL position and is
OFF on the other positions. Only placing on the
NEUTRAL position, the pilot lamp is ON in
green.
Turning Lamp(9)
When you turn left, the left turning lamp will turn
green; When you turn right, the right turning
lamp will turn green
