CCTV SYSTEM
26
17.Privacy Masking Settings ( need camera support)
MAIN MENU
<SYSTEM SETTINGS>
<CAMERA SETTINGS>
<DISPLAY SETTINGS>
< DOME SETTINGS>
<RUN SETTINGS>
< SYSTEM INFORMATION>
EXIT
DOME SETTINGS
Dome title:DOME0001
Boot action: 000
Free action: 001
Free time :005
<IR settings>
< Aram settings>
< Privacy masking>
< Others>
SAVE EXIT
PRIVACY SETTINGS
NO. <1-8>: 1
PTZ position
The shielding position
The shielding size
Clear
Save
RETURN EXIT
1.Set Privacy Masking NO.
Move cursor to [ Number], turn joystick right, the setting area display
shine situation. Up and down the joystick to number settings, then turn
joystick right or left to save or press[ OPEN/ IRIS] save modify. Descrip-
tion: in the setting of privacy zone number,
If the privacy protection is
corresponding to the current zone has been set ,In the completion of the
regional number set, The speed dome will automatically set the privacy
protection block to the monitor screen.
2. Set PTZ masking position
Move the cursor to [ SET MASK POS/ set PTZ position] , then turn
joystick right , Choose to set the privacy protection area image appears
on the screen ,press [ OPEN/IRIS ON] confirm and restore menu mode.
3. Set privacy protection position
Move the cursor to [ SET MASK POS/ set PTZ position] , then turn
joystick right , Choose to set the privacy protection area image appears
on the screen .If the area have already set the privacy protection
area..
Jump directly to this step the operation.
The next move around the joystick to adjust privacy protection
block position on the screen. Note: press rocker is not put, about 2 sec-
onds later, privacy protection block will automatically move
with rocker direction. Shift position, press [OPEN/IRIS ON] to confirm
the aperture open and recovery menu mode.
4. the size of the privacy settings
Move the cursor to the [SET MASK SIZE/] set the privacy block
size, and then the joystick right, around move the joystick to adjust
privacy protection block width, move the joystick to adjust privacy
protection block height. Note: press rocker is not put, about 2 seconds
later, privacy protection block width or height with rocker direction
automatically increase and decrease. Press [OPEN/IRIS ON] to confirm
the aperture open and recovery menu mode.
5 save settings
After these settings, move the cursor to <save ,turn joystick right or
[ OPEN/IRIS ON], save modify.
6. clear settings
Privacy protection to delete the current region number, then move the
joystick, the cursor pointing [CLEAR] clear, then the right rocker can be
deleted.
IR Intelligent Speed Dome Operation Manual ver2.0
19
9.Communication Settings
MAIN MENU
<SYSTEM SETTINGS>
<CAMERA SETTINGS>
< DISPLAY SETTINGS>
< DOME SETTINGS>
<RUN SETTINGS>
<SYSTEM INFORMA TION>
.EXIT
SYSTEM INFO
Language: Chinese/English
Output Format: PAL/NTSC
Pan Display Position:49<0-63>
Tilt Display Position:31<0-31>
<Date and Time>
<Password>
<Communication>
<Others
>
<Restore Factory Settings>
RETURN EXIT
COMMUNICATION
Address Configuration: Hard
ware/ Software
Address:001
Protocol: PELCO-D
Baud rate:2400
On trial
Save
RETURN EXIT
Address configuration
：
Hardware or software configuration.
1.Software configuration
Set method: Move cursor to “address configuration”, turn joystick
to right and up and down to choose software. When start software
address, the second address could be take effect.
Note: < Software> stand for software address start
<
Hardware> stand for ID switch selection.
2 .Protocol &Baud rate
When users can not use auto– identification protocol and baud
rate, they can choose fix protocol & baud rate.
3.Save
If change (address, protocol, baud rate )any of them , after move
cursor to <on trial>, then turn joystick right, then start countdown(2
minutes) , the user must complete the equipment debugging .such
as: the address ,protocol, baud rate of the speed dome could be the
same with the DVR, keyboard. Then up and down the joystick,
when the state is display < success>, it means the successful commis-
sioning.
Up and down the cursor to <SAVE>, Turn joystick right or
press [OPEN/ IRIS ON] save and modify
