CCTV SYSTEM
14
2.Basic Operation
Call 65 or 95 preset point, Open the speed dome menu
Up and down the joystick operation, Select menu tem and modify the project value
Operate the joystick right and left, confirm the selected
item value, at the same time into the one or the next set.
“confirm key ’’can enter the menu and confirm the current
Input and recovery mode. In all cases through menu programming
position setting confirmed back to the
【
OPEN/IRIS ON] menu mode. (in the camera menu
means go into the next page button)
‘the aperture pass' and mens to cancel the current input mode. In all cases through menu pro-
gramming position setting when
【
CLOSE/OPEN OFF
】
means recovery to menu mode
In all speed dome camera menu programming for increasing 10 digits
In all the speed dome camera menu programming for decreasing 10 digits
Move up the upper menu item in camera menu
Move down the next menu item in camera menu
IR Intelligent Speed Dome Operation Manual ver2.0
31
22.Zone Indication Settings
MAIN MENU
<SYSTEM SETTINGS>
< CAMERA SETTINGS>
<DISPLAY SETTINGS>
<DOME SETTINGS>
<RUN SETTINGS>
< SYSTEM INFORMATION>
EXIT
RUN SETTINGS
< Preset>
< Tour>
< Limit scan>
<Pattern scan>
< Zone>
< Timing>
< Auto-tracking
>
RETURN EXIT
ZONE INDICATION
NO.<1-8> :1
Title: Zone 1
Start : open/close
Left border
Right border
Save
RETURN EXIT
Regional indicator refers to when a user control rocker
control ball machine rotates to the region a preset range, the
screen display area title set in different regions, conven-
ient user identification in the field of view. Setting method are
as follows:
1.Set zone indication number
Move cursor to “ NO.” ,turn joystick right or press [ OPEN/
IRIS ON] ,go into zone number setting, turn joystick right or
press [ OPEN/IRIS ON] and confirmation.
2.Set zone indication title
Move cursor to ‘ title” , turn joystick right or press[ OPEN/
IRIS ON] go into zone indication to set sub menu, up and
down the joystick to set pattern title setting. Title support 8
character, support characters (0-9,A-Z, space) , Finished set
title then joystick turn right or left to confirm or press[ OPEN/
IRIS ON] confirmation.
3.Start zone indication
MIRIS ON] ,the setting area display shine situation ,up and
down the joystick with zone number open/ close settings.
4.Set left border
Move cursor to “ left border setting” , turn joystick right or
press[ OPEN/IRIS ON] , go into border setting mode. The
user can operate joystick to control speed dome , up to desired
position to press [ OPEN/IRIS ON], they will save zone left
border in current position.
5.Set right border
Move cursor to “ right border setting” , turn joystick right or
press[ OPEN/IRIS ON] , go into border setting mode. The
user can operate joystick to control speed dome , up to desired
position to press [ OPEN/IRIS ON], they will save zone right
border in current position.
6.Save
After these settings, move the cursor to <save ,turn joystick
right or [ OPEN/IRIS ON], save modify.
