CCTV SYSTEM
18
8.Menu Password Protection Settings
MAIN MENU
<SYSTEM SETTINGS>
<CAMERA SETTINGS>
<DISPLAY SETTINGS>
< DOME SETTINGS>
<RUN SETTINGS>
<SYSTEM INFORMA TION>
.EXIT
SYSTEM INFO
Language: Chinese/English
Output Format: PAL/NTSC
Pan Display Position:49<0-63>
Tilt Display Position:31<0-31>
<Date and Time>
<Password>
<Communication>
<Others
>
<Restore Factory Settings>
RETURN EXIT
Password
New password:*****
Start: ON/OFF
Save
RETURN EXIT
There is no limit permissions set to modify the speed
dome system, the password can protect the speed dome. When open
the speed dome , the users need input the password. Modify the pass-
word as follows:
1.Password switch
Move the cursor to
“
start”, turn joystick right to choose password
open or close. When the password protection is open , you need input
password.
2.Modify the password
Move the cursor to
“
new
password
”,
turn the joystick right to
choose input position, when the
input position turn to spark state,
the joystick up and down to increase and decrease the number.
Turn the joystick left and right or press[ OPEN/ IRIS ON] confir-
mation and input, press [CLOSE/ IRIS OFF] cancel input.
Speed dome boot password is 000000
Up and down the cursor to <SAVE>, Turn joystick right or
press [OPEN/ IRIS ON] save and modify
IR Intelligent Speed Dome Operation Manual ver2.0
27
18.Preset settings
MAIN MENU
<SYSTEM SETTINGS>
<CAMERA SETTINGS>
<DISPLAY SETTINGS>
<DOME SETTINGS>
<RUN SETTINGS>
< SYSTEM INFORMATION>
EXIT
RUN SETTINGS
< Preset>
< Tour>
< Limit scan>
<Pattern scan>
< Zone>
< Timing>
< Auto-tracking
>
Return EXIT
PRESET
NO.<1-90:151-254.:001
Title: POS001
Position
Clear
Save
RETURN EXIT
1 .set the preset position number
Move the cursor to "number", or press [OPEN/IRIS ON ]go into
the preset number mode. Joystick up and down to set preset number.
The dome support 195 PCS preset, 1-90,151-255,then turn joystick
right or press [ OPEN/IRIS ON] and confirmation.
2.Set preset title
Move cursor to “ title” , turn joystick right or press [OPEN/ IRIS
ON] go into preset title settings,
Preset title up to 8 charac-
ters
.,support characters (0-9,A-Z, space) . Finished title setting, then
joystick turn right or left to confirm or press[ OPEN/IRIS ON confir-
mation.
3.Call preset
Move cursor to “ Call “, Press the aperture open will call the
corresponding preset number of preset scenarios.
4.Preset position setting
Move cursor to “ position” , turn joystick right or press [ OPEN/
IRIS ON] go into preset setting mode, now the user can operate with
the seed dome .Reach the desired preset , then pres [ OPEN/ IRIS
ON, confirm to save the present position.
5.Clear preset scene
Move cursor to “ clear “ , joystick turn right or press [ OPEN/ IRIS
ON] ,delete corresponding preset number in preset scene.
6. After these settings, move the cursor to <save ,turn joystick right
or [ OPEN/IRIS ON], save modify.
7.if want delete the zone number of privacy protection, move the
cursor to [ clear], then turn joystick right and delete.
