CCEI
Limpido EZ
®
Duo
v1.0
Page 8
OPERATION
ELECTROLYSIS
INDICATOR LIGHTS AND BUTTONS
Electrolysis and pH regulation operate independently and can be started with the corresponding
switch.
A luminous switch allows switching on the device. The indicator lights indicate the
Limpido EZ
®
Duo
’s operating state, while the key is used to select its operating mode.
MODE CHOICE
The
key selects the electrolyser’s operating mode.
Shock / Permanent Mode (Indicator light unlit)
The device produces as long as the filtration is running.
Automatic / Thermoregulated Mode (Indicator light lit)
The production time is adjusted versus temperature. Depending on the pool
size and its frequentation, a choice of 3 thermoregulation curves is available.
CURVE CHOICE
In Automatic mode, pressing and holding down the
key for 3 seconds
allows changing the adapted thermoregulation curve.
The indicator light corresponding to the active curve flashes. To select the
next curve, briefly press the
key.
To save the desired curve, press and hold down the
key again for 3
seconds.
Limpido EZ
®
Duo
recalculates the optimum production time and starts a
new cycle.
The curve used by the device is displayed whenever production starts in
Automatic mode
(thermoregulated)
. The green indicator light corresponding to the activated curve flashes for a few
seconds.
pH Setpoint
adjusting button
pH
Regulation
Start/Stop switch
Flow
indicator light
Electrolysis
Start/Stop switch
Underproduction
indicator light
Cover
indicator
light
Thermoregulated
Mode indicator light
Overdose
indicator
light
pH 7
calibration
screw
pH
indicator
C3
C2
C1
Polarity
indicator
Overproduction
indicator light
Production
indicator
