CC Systems CC Pilot XS All-Integrated, Руководство пользователя и справочное пособие

Страница: 35 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
35
On: black tick in the checkbox. The power output will switch on when the
system enters the particular system mode.
Off: empty checkbox. The power output will switch off when the system
enters the particular system mode.
Invalid: grey tick in the checkbox. No change will be made when going
into the particular system mode. Use this option when other applications
are controlling the power output.
Be aware that putting a high load on the power outlets will result in a higher unit
temperature.
Memory
From the memory tab it is possible to select the name to be used for attached USB
memory units. Select the name to use from the folder name drop down list box.
Backlight
From the backlight tab it is possible to enable and adjust settings for the automatic
backlight control.
To enable or disable the automatic backlight control check or uncheck the checkbox
Use the light sensor for automatic backlight adjustment.
By selecting the soft transitions checkbox the backlight will slowly change intensity for
new light conditions.
Adjust the sensitivity of the backlight control by moving the sensitivity slider. By moving
the slider against low, a bigger change in surrounding light will be needed for any
change in backlight level and vice versa.
When enabling automatic backlight control, the brightness buttons at the front of CC
Pilot™ XS will change the offset of the backlight level. This offset is depending on the