CC Systems CC Pilot XS All-Integrated, Руководство пользователя и справочное пособие

Страница: 16 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
16
Power Supply Connector
Marking: X1 POWER
Connector Type: DIN M12 4-pole, A-coded, male
The CC Pilot™ XS power supply can range from 10 – 36 volts. If the power supply
voltage goes beyond this range, the unit shuts down. In order to ensure stable
operation with tolerance against temporary supply disruptions, the supply voltage
should be at least 12 V.
For complete hook up instructions, see the section entitled Installation.
Video (Video1, Video2)
Marking: X4 VIDEO
Connector Type: DIN M12, 5-pole, A-coded, female.
The connector is used to take in video signals of the type composite video. They are
PAL- and NTSC-compatible.
The video connector can be used to power external using the the12V unfiltered supply.
The output has a current limit that depends on the internal unit temperature. The current is
limited to 0.150A at an internal unit temperature of 70 degrees Celsius and around 0.2A in
normal working conditions.
The cable which is used to connect the camera to the computer shall be a 75-O coaxial
cable, e.g. M17/94-RG179.
Ensure that there is no DC-offset (supply current) on the video signal connected since
this can cause damage to your CC Pilot™
XS.
Pin Description
1 B28 VDC)
2 ON/OFF (+28 VDC)
3 GND
4 GND
Pin Signal
1 GND ch 1
2 Video ch 1
3 Video ch 2
4 12V
5 GND ch 2