CC Systems CC Pilot XS All-Integrated, Руководство пользователя и справочное пособие

Страница: 21 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
21
CC Pilot™ XS
Installation
Your CC Pilot™ XS must be installed in such a way that the unit is not exposed to any
unnecessary stress or present any traffic danger. In this section, some
recommendations are made regarding methods for how the unit should be installed.
CC Pilot™ XS shall only be installed and serviced by authorized personnel. If the unit is
opened by non-authorised personnel, the warranty becomes void.
Placing and installing of the unit and peripherals
The CC Pilot™ XS shall be installed in a ventilated space where air is able to circulate
around the unit, therefore not near hot air vents or the like. If the unit becomes too
warm, it may not perform to its full capacity and, with high temperature, cease to
function.
If the preceding instructions are not observed, the cooling of the unit can be degraded
which can lead to overheating, consequently causing permanent damage to the unit.
When the CC Pilot™ XS or any device is installed it is important to do so in such a way
that the installation is traffic-safe. One should also avoid installing the unit where it will
block the driver’s view. This applies to both the instrument panel and the view through
windshield. One should also think about how the placement affects personal safety in
the event of a collision.
We recommend installing CC Pilot™ XS in such a way that it is not exposed to
unnecessarily vibration or other stress
.
Bracket Mounting
The CC Pilot™ XS is preferably mounted on a convenient bracket which allows for
adjustment of the display’s position and angle. The bracket should have, or be provided
with, a flat fastening plate to which the unit is bolted (VESA 75). To fasten, use the
appropriate M6 cap screw of type MC6S (Allen) or MRT (Torx). Note that the enclosure has
blind holes, which give a maximum thread depth in the enclosure of 6.5 mm. The maximum
torque is 2.5 N-m. Apply a thread locker in all bolt holes, e.g. Loctite 222.