Page 21 of 40
Infeed guide assy 2:
this should be kept
clean. Build up of dirt
etc on the faces will
cause the cable to
catch on the guide.
Clean with any
workshop solvent.
Infeed guide assy:
this should be kept
clean. Build up of dirt
etc on the faces will
cause the cable to
catch on the guide.
Clean with any
workshop solvent.
Pay particular
attention to the joint
faces of the inserts
and the housing.
Meas. system fixed roller:
this should be kept clean. Build up of dirt
etc on the faces will cause faulty readings of speed and/or distance.
Clean with warm soapy water, wash off and allow to dry. (For
stubborn marks and build up M.E.K. (methyl ethyl ketone) may be
used, this is a solvent; the safety precautions outlined on the COSHH
document supplied with the chemical
must
be observed.
Measuring roller:
this should be kept
clean. Build up of dirt etc on the
faces will cause faulty readings of
speed and/or distance. Clean with
warm soapy water, wash off and allow
to dry. (For stubborn marks and build
up M.E.K. (methyl ethyl ketone) may
be used, this is a solvent; the safety
precautions outlined on the COSHH
document supplied with the chemical
must
be observed.
Drive rollers:
these should be kept
clean. Build up of dirt etc on the
faces will cause slip and/or jerky
feeding of the cable. Clean with
warm soapy water, wash off and
allow to dry. (For stubborn marks
and build up M.E.K. (methyl ethyl
ketone) may be used, this is a
solvent; the safety precautions
outlined on the COSHH document
supplied with the chemical
must
be
observed.
