CB Svendsen FA-20, Руководство пользователя

Страница: 25 / 26

Option modul type ”12 puls
Connection Manual:
Pulse input Pulse input
1 to 4 in
5 to 8 in
connector connector
to the left. In the middle
NOTE: Pulse input 1 and 2 on the bottom PCB is disabled when the 12 pulse
mounted..
Option modul type ”12 pulse inputs”.
NOTE: If the encoders are genuine S01
(i.e. Pulses is limited, see S01) and
bottom PCB serial communication ports
M1, M2 and Multi is not used, then all 12
pulse inputs can be used by internal
24Vdc.
If the serial ports are NOT used and if
pulses are NOT limited, them max.
pulse inputs can be used by internal
24Vcd.
Use of external 24Vdc:
If you want to use the bottom P
communication ports M1
while more than 6 pulse inputs (8 if S01
pulses) at the Puls 12 module, you have
to connect an external 24Vdc supply to
terminal 1 (+24 Vdc) and terminal 2 (G
AND put both the yellow switches in the
up position (i.e. opposite to the shown
position on the images).
Position down (as shown on the images)
connects the internal 24Vdc.
LED indication of the received pulse:
There are 3 columns with 4 LEDs
mounted on the module.
in the left pillar shows pulses from pulse
input 1 to 4. The yellow LEDs in the
middle column shows pulses from pulse
input 5 to 8 and the orange LEDs in the
right column shows pulse inp
Pulse input
9 to 12 in
connector
In the middle. to the right.
NOTE: Pulse input 1 and 2 on the bottom PCB is disabled when the 12 pulse
25
the encoders are genuine S01
Pulses is limited, see S01) and if
bottom PCB serial communication ports
M1, M2 and Multi is not used, then all 12
pulse inputs can be used by internal
If the serial ports are NOT used and if
pulses are NOT limited, them max. 8
pulse inputs can be used by internal
of external 24Vdc:
If you want to use the bottom PBC serial
communication ports M1, M2 and Multi
while more than 6 pulse inputs (8 if S01
pulses) at the Puls 12 module, you have
to connect an external 24Vdc supply to
terminal 1 (+24 Vdc) and terminal 2 (Gnd)
AND put both the yellow switches in the
pposite to the shown
the images).
Position down (as shown on the images)
connects the internal 24Vdc.
LED indication of the received pulse:
There are 3 columns with 4 LEDs
mounted on the module. The green LEDs
in the left pillar shows pulses from pulse
input 1 to 4. The yellow LEDs in the
middle column shows pulses from pulse
input 5 to 8 and the orange LEDs in the
right column shows pulse input 9 to 12.
NOTE: Pulse input 1 and 2 on the bottom PCB is disabled when the 12 pulse module is