Remtron Pump Boss II
User Manual
21
9M02-8814-A001-EN
Version 2.3
7.5
Transmitter Troubleshooting
The transmitters have a bicolored LED status indicator to aid in troubleshooting. Due to the rough treatment it
may endure, most problems are likely to occur in the transmitter. Thoroughly diagnose the transmitter before
proceeding to the receiver.
WARNING
When testing the transmitter, the receiver may become active, resulting in system operation.
Always assume the system is working and will respond when testing a transmitter.
Table 1: Transmitter Troubleshooting Chart
LED Indication
Possible Cause
Remedy
LED is OFF
Transmitter is off
Press ‘ON’ switch
Batteries are dead
Replace batteries
Transmitter failure
Call for service
LED alternating RED/GREEN
Batteries getting low
Change batteries at the next convenient
opportunity
LED is on RED continuously
Switch activated with
‘START’
Activate ‘STOP’ switch then release
‘STOP’ switch; activate ‘START’ switch
without touching any other switch
Transmitter Failure
Call for service
!
