CANplus
TM
CP640 - EN
Control Panel Operation Manual
16
9M02-1000-A001-EN
Revision B
–
RPM Settings
*
Intermediate
*
Run
–
Time Profile
*
Warm Up
*
Ramp to Intermediate
*
Ramp to Run
*
Ramp to Cooldown
*
Cooldown
Telemetry
•
Status
•
Address (CAN address for the telemetry device)
Service Timers
•
Timers 1-16 (each timer is listed separately)
–
Hours remaining
–
Reset
Tier 4 Control
•
Inhibit – OFF/ON (inhibit Regenerations)
•
Request Force (request a Force Regeneration; depending on conditions, ECU may not honor)
•
Status (database Viewer for Tier 4 related status messages from the ECU)
Database Viewer
3.9.2 Access Levels
The available menu items are dependent upon the current access level. The current access level is shown in the
upper right corner while in the menus. The CP640 supports up to three independent PINs that are configurable.
The standard CANplus
TM
configuration has the following PINs settings:
•
User = 1000
•
Tech = 1111
•
Admin = 2222
•
Menu PIN Required = OFF
Elevate Access Level
When the panel is turned on, the access level reverts to the User level. To gain access to the Tech or Admin
levels, use the Elevate Access Level menu, as follows:
Configuration
→
System
→
PIN Settings
→
Elevate
Access Level
.
