CANplus
TM
CP640 - EN
Control Panel Operation Manual
23
9M02-1000-A001-EN
Revision B
Install the USB drive in the panel’s USB port. The current configuration can be exported by going to the
System
→
Export Config
menu. To import a new configuration, the menu access level must be at the Tech or Admin
level (see the
section). A new configuration is imported by going to the
System
→
Import Config
menu. New configuration changes take effect immediately. Therefore, the engine should not be running when
importing a new configuration.
When finished with exporting or importing configurations, remove the USB drive, reinstall the protective water-
tight rubber plug, and secure the faceplate with the four screws.
