CANplus
TM
CP640 - EN
Control Panel Operation Manual
13
9M02-1000-A001-EN
Revision B
An alarm indicator is displayed near the upper right corner of the display as long as alarms are active. The
indicator and alarm messages in the list are automatically removed when the alarm has not been received for a
few seconds.
Note:
Only active faults are displayed in the alarm list. Once a fault is corrected, it is automatically removed
from the list. To view previously active faults, press the “STORED” button.
3.8 Service Timers
The CP640 display provides 16 service timers to alert the operator of required maintenance. The time interval for
each timer can be adjusted in increments of 10 hours. A popup message is displayed after completion of the
display’s self-test if a timer (or timers) has expired, alerting the user that service is required. The message is
displayed on each power-up until the elapsed timer is disabled or reset. The service timers can have their
respective names customized to monitor engine- and pump-related parameters. All 16 service timers can be
monitored via wireless telemetry.
3.9 Menus
The menu pages can be accessed by pressing and holding button 5. After 1 second, the top-level menu page
will appear. From there the functions of the five display buttons change to allow navigation and selecting and
modifying parameters.
