CANplus
TM
CP640 - EN
Control Panel Operation Manual
10
9M02-1000-A001-EN
Revision B
3
Display
The CANplus
TM
display is a robust, sunlight-viewable 3.5” QVGA color display with five integrated backlit buttons
housed in a rugged, water-tight IP66 rated enclosure. The five soft keys simplify and enhance the user interface
by providing a configurable auditory beep and positive tactile feedback when pressed.
The display can show virtually any SAE J1939 parameter reported by the ECU, including RPM, engine
temperature, oil pressure and diagnostic codes. It can be easily configured to customer preference, including
gauge type (analog or digital), gauge arrangements, gauge size, units and language.
Note:
Different software versions may have slightly different displays.
3.1 Adjusting Lighting and Contrast
When the menu bar is not visible, press button 5 (button on far right) to open the lighting and contrast menu bar.
The display has multiple back-lighting levels allowing the display to be viewed in the dark. The level is adjusted
by pressing button 1 to decrease or button 2 to increase the display illumination. Contrast is adjusted in the same
manner using buttons 3 and 4.
Note:
The display adjusts the contrast with the ambient temperature. Manual contrast adjustments are only
necessary with extreme climate change.
Exit the menu by pressing button 5. The lighting and contrast settings are retained after the unit is powered off.
3.2 Button Bar
Pressing any of the first four soft keys on the display will prompt the “button bar” key function legend to appear at
the bottom of the display above the keys. The button bar will show an icon above the button which corresponds
to its current function, as shown below.
