Cattani BLOK-JET SILENT 1 AC200, Инструкция по эксплуатации

Страница: 34 / 48

34
cod: ed. 09-2021
• The suction unit is covered by a warranty for
one year from the date of sale, the compressor for
three years, provided the warranty tag is completed
with the following information and returned to the
manufacturer: date of sale, name of seller and user.
• The warranty and manufacturer’s liability shall
cease to apply if the equipment is serviced with
unsuitable products or products other than those
indicated by the manufacturer, used incorrectly
or if the equipment is tampered with in any way by
persons not authorized by the manufacturer.
• The manufacturer, dealers, agents and authorized
technicians are available for advice, suggestions and
to provide documentation, spare parts and any other
help you may need.
• The manufacturers may decide to introduce changes
in the products without notice due to technical needs,
product improvement programmes, regulatory or
functional problems, difficulty in sourcing parts or
semi-finished products.
• Updated manuals are available from our website:
www.cattani.it . We recommend you refer to these
especially for the latest safety updates .
• Smart systems and compressors are AEE
equipment, thus subject to WEEE (Waste Electrical
and Electronic Equipment Directive) regulations.
• During transport and storage, the packaged
equipment can withstand temperatures ranging
from -10 °C to + 60 °C.
• The packages cannot be exposed to water and
splashes and cannot withstand humidity above
70%.
IMPORTANT WARNINGS
TRANSPORT AND STORAGE
• Before packing, we recommend you clean and
disinfect the suction unit with Puli-Jet Plus New
(see chapters on “Signs and warnings” and “Regular
maintenance”).
• Drain all tubes and outside/inside communications
as liquid residues (even disinfectant) could damage
the control unit. Remove the amalgam retention
vessel, add the disinfectant, close the vessel with
the tight cover.
Dry the suction unit inside and outside, close all
outside/inside communications with the stoppers
provided, install a new amalgam retention vessel,
wrap the suction unit and the control unit separately,
to ensure maximum water tightness.
• Place the equipment inside a polyethylene bag
and pack with triple-wave cardboard.
TRANSPORT OF USED EQUIPMENT
IMPORTANT WARNINGS
TRANSPORT AND STORAGE
TRANSPORT OF USED EQUIPMENT