Cattani BLOK-JET SILENT 1 AC200, Инструкция по эксплуатации

Страница: 15 / 48

8
7
15
cod: ed. 09-2021
EN
G
LI
SH
ROUTINE MAINTENANCE
COMPRESSOR AC200 AND AC300
ROUTINE MAINTENANCE
TO BE CARRIED OUT BY TRAINED MEMBERS OF THE SURGERY STAFF
• Danger of electrical shock, even 230 V
can be fatal.
• High temperature.
• Generic danger sign.
• Obligatory direction of flow or rotation.
Before getting close to the compressor remove
power and make sure that nobody can restore
power without informing the person in charge
of maintenance. If the compressor is housed in a
dusty place where it can suck up solid particles
such as dust, sand, dry leaves or other, you should
frequently clean the fans of the head (7) , the motor
(6) and the air-to-air exchanger (4) as well as clean
and replace the filters on the cylinder head very
often. Every 12 months, check the efficiency of
fans; the compressor cannot operate for long times
without adequate ventilation. The tap (8) , located
under the air tank, must be opened regularly; if you
find there is moisture you need to call a technician.
Keep in mind that the air-drying system cannot
work well with a temperature above 35 °C. The
compressor must not start running if air is not
used; if that happens, check for leaks in the system
or in the machines that use compressed air. The
charging time is approximately 45/55 sec.; pause
time, required for the regeneration of the silica gel
and cooling, takes up about a third of the charging
time. Careful monitoring prolongs the life of the
machine: when a machine becomes noisy or creates
vibrations, it means that something is loose or worn
out, in this case call a technician. Based on their
experience and on the load of work at the surgery,
operators may decide to reduce or increase the
frequency of maintenance operations that we have
suggested.