24
TROUBLESHOOTING
TROUBLESHOOTING
In this chapter you will fi nd the most common problems you may encounter when using
this appliance. If your problem is not listed here or is listed and persists, stop using the
appliance, disconnect the power plug from the power outlet and contact an authorized
service centre.
UNDER NO CONDITION SHOULD YOU REPAIR OR DISSAEMBNLE THE APPLIANCE
YOURSELF. THE APPLIANCE DOES NOT CONTAIN ANY PARTS THAT CAN BE REPAIRED BY
YOURSELF.
Problem
Solution
The appliance did not start.
Check that the power cord is correctly connected to the
power outlet.
Check that the mains socket is powered by plugging in
another appliance.
Check that the arm is folded down and locked correctly
and the speed control is set to “0”.
If the tilt arm is hot to the touch, disconnect the power
plug from the power outlet and allow the food processor
to cool.
The whisk is placed too low or
too high in the container.
Unscrew or screw the screw on the whisk. Follow the
instructions in
“Adjusting the whisk”
.
The light fl ashes.
Tilt-back head.
Set the speed control to “0”.
If the light is still fl ashing, the food processor is too hot.
unplug the mains plug from the wall socket and let the
appliance cool down.
The surface of the food processor
is hot.
The surface of the food processor may become hot
during use. It is recommended not to touch the top of
the hinged arm.
If you are working the solid mixtures for a long time, the
hinged arm may get warm. This is normal.
The food processor is equipped with a safety thermal
fuse that automatically shuts off the engine if it should
overheat. In this case, disconnect the power plug from
the wall socket and let the appliance cool down.
