14
OPERATING YOUR STAND MIXER KM 8020
OPERATING YOUR STAND MIXER KM 8020
BEFORE FIRST USE
Before fi rst use, remove all packaging
and advertising labels / stickers from the
appliance. Make sure you have removed all
accessories from the package.
Wipe the stand mixer base with a soft sponge
slightly moistened in warm water. Wipe dry
using a clean wiping cloth.
Wash the blending beaker, protective cover,
beaters, hooks and all accessories in warm
water with a small amount of washing-up
liquid. Rinse in clean water and wipe dry.
Before storing the stand mixer, make sure
that all parts are clean and dry.
FOOD PROCESSOR CONTROLS
Tilt-back head
Always release the lock to raise or lower the
arm. Hold the arm by the handle with the
other hand.
You must hear a click to be sure the arm is
properly lowered.
If you are about to lower of lift the tilt-back
head, always make sure that the power cord
is unplugged from the mains socket.
ATTENTION:
Never try to lift or lower the tilt-
back head by force. There is a risk of
damage to the appliance.
WARNING!
To prevent serious
injury, keep your
hands and fingers
away from the
hinged arm.
LIGHTING
The LED light will illuminate the interior
of the mixing container while the robot is
operating.
The LED light will fl ash In the event of an
operating error or the overheating of the
motor. More information further in the
user's manual.
MOUNTING THE POWER CORD SOCKET
The power cord can be placed in the base of
the food processor.
Pull the plug to remove the power cord from
the inside of the base, and then plug it back
into the base after use.
ATTENTION:
Pull and insert the power cord with
adequate force to prevent damage,
for eample to the base.
FILLING FUNNEL
The food processor arm is equipped with
a fi lling hole, allowing you to easily add
ingredients while the food processor is
running. It is always recommended to use
the fi ller cap.