Catler JS 8010, Инструкция по эксплуатации

Страница: 15 / 36

15 15
• Insert the pressing auger screw into the strain-
er and push it down properly so that it is seat-
ed on the hexagonal motor unit drive shaft.
• As shown in the picture, place the lid on to
the juicing chamber and secure it in place by
turning it clockwise.
• Place the juice jug underneath the juice spout,
and the pulp container underneath the pulp
ejection outlet. These two containers are in-
terchangeable. You may use a glass or another
suitable container instead of the juice jug.
• The pusher is used for pushing ingredients
through the feed tube. However, the majority
of ingredients will be automatically pulled into
the juicing mechanism by the pressing auger
screw. If necessary, use the pusher to push in
the ingredients.
• Your juicer is now assembled and ready for
use.
• The juicer is equipped with a safe start mech-
anism. This means that it cannot be started
unless the juicing chamber is properly seated
on the motor unit, or unless the lid is secured
in the closed position.
ASSEMBLING THE JS 8010 JUICER