23
Uploading the
3
Select the file you want to load, and then click on [Open].
Compatible files
Description
.etd
e-Train Data™Ver.3/4 file
.csv
e-Train Data™Ver.2 file
.ces
CATEYE Sync file
* The CATEYE Sync file exported from another PC can also be loaded.
* The CSV files not created with e-Train Data™ Ver.2 cannot be imported.
The data list screen appears, and the selected file is added to the data list.
Trip data
Data contained in the trip data
Date and clock (date/time when the measurement started)
Elapsed time
Data recorded at the record interval specified
•
Location information
•
Trip distance
•
Sea level altitude
•
Current speed
•
Cadence *1
•
Heart rate *1
•
Power *1
*1 : These are measured when using an ANT+ compatible sensor.
Record interval and capacity limit
This unit records data at the specified interval. The record interval can be selected from 1, 2 or
5 seconds according to your use (Default: 1 second).
The maximum recording time and the maximum time for one trip depend on the selected
record interval as follows.
Record interval
Maximum recording time
(total time of all trip data)
Maximum time for
one trip
Maximum number
of trips
1 second
35 hours
12 hours
250 trips
2 seconds
70 hours
24 hours
5 seconds
175 hours
60 hours
* The recording time and number of trips above are for reference only. These may be differ-
ent according to the operating environment.
* For information on how to set the record interval, see “Changing the computer configura-
tion” (page 27).
* When exceeding any of the conditions above, “
MEM FULL
” appears flashing on the screen,
and no new data can be recorded. Transfer the trip data to CATEYE Sync™ to secure the stor-
age volume of the computer. Only when exceeding the maximum time for one trip, the reset-
ting operation (page 16) allows you to start the measurement as another trip.
