34
Changing the
computer
configuration
Night-time setting
Set the time when the backlight lights up.
* When you do not want to turn on the backlight throughout the
day, set the start time and end time to the same hour.
Start time
Enter the start time when the backlight
lights up.
MODE
Increase the value
End time
Enter the end time when the backlight
lights off.
MODE
Increase the value
MODE
MODE
MODE
MENU
(press & hold)
(press & hold)
From “Night-time setting”
Setting the record interval
Set the second-scale interval to record the measurement data.
* The maximum recording time / maximum time for one trip that
can be recorded in the computer depends on the selected interval.
Record
interval
Maximum re-
cording time
(total time of all
trip data)
Maximum time
for one trip
1-S
(1 second)
35 hours
12 hours
2-S
(2 seconds)
70 hours
24 hours
5-S
(5 seconds)
175 hours
60 hours
MODE
1-S 2-S 5-S
MODE
MENU
Entering the total distance
You can enter the start value of the total distance, and add the trip dis-
tance to it. Use this function when you renew and/or reset your unit.
* Enter the total distance in integer number only.
MODE
Increase the value
MODE
Move digits
(press & hold)
MODE
MENU
(00000 — 99999)
(press & hold)
(press & hold)
(press
& hold)
Changing
the settings
Changing
the settings
Changing
the settings
MODE
MODE
MODE
From “Pairing the sensor” (page 32)
To “Setting the record interval”
To “Selecting the speed unit” (page 35)
Register
the setting
Register
the setting
Register
the setting
