background image

41

H

ANDLING

 

WARNINGS

Handling warnings

Please observe the following to ensure that you will have many years of good use from your EC-T220 treadmill.

Caution

• Do not disassemble the control unit or main body. If there is a problem, contact your dealer where

the unit was purchased.

• Avoid using in locations with high temperature or high humidity, or in locations where it may get wet.
• Handle the power cable with care. If the cord is pulled, the connection may be severed.
• Connect the power plug directly to a power socket, for example one on the wall. If two or more

machines are connected using an extension cord, etc, a power voltage failure may occur and the
machine may not operate properly.

• When not using the machine, be sure to turn the power switch off and remove the plug from the

outlet.

• If the running belt is rubbing against the side, the belt will wear more quickly. Adjust the running belt

before use.

• Do not use paint thinner, kerosene, gasoline, alcohol, or other organic solvents to clean the main unit.

For cleaning, wipe with a cloth and neutral detergent. Then dry well by rubbing with a dry cloth.

• Avoid placing in a location which receives direct sunlight.

4

Содержание EC-T220













































Отзывы: