Cateye EC-T220, Инструкция по эксплуатации

Страница: 39 / 44

39
ON 1
2 3 4
DI P
ON 1 2
3 4
DI P
ON 1 2
3 4
DIP
ON
1 2 3 4 DIP
Checking the total distances
The total distances which can be used as a guide for when to
change the running belt can be checked.
• Press and hold the SPEED + button and the I but-
ton together for 3 seconds to change to the total distance check
display. The distance display will show the total distance trav-
eled up until that time.
After checking the total distance, press the EMERGENCY
STOP button to return to the initial screen.
O
THER USEFUL FUNCTIONS
2
Dip switch 1
Switching between mph display and km/h display
• As mentioned on page 10 of the "Start Guide," the display can
be switched between mph and km/h by the dip switches inside
the control unit.
• When the no. 4 switch of dip switch 1 (SW1) is OFF, the display
units are mph. When the no. 4 switch is turned ON, the display
units are changed to km/h.
• Switches no. 1, no. 2, and no. 3 are not used.
• After changing the dip switch settings, turn the power off and
back on again for the change in settings to take effect.
Dip switch 1 (SW1)
No. 4: ON km/h
No. 4: OFF mph
Changing the language
• As mentioned on page 10 of the "Start Guide," the language
can be changed from English to French, Spanish, or Japanese
(or German) by the dip switches inside the control unit.
• For English specifications, the no. 1 and no. 2 switch of dip
switch 2 (SW2) is ON, and all the others are OFF.
• Switches no. 3 and no. 4 are not used.
• After changing the dip switch settings, turn the power off and
back on again for the change in settings to take effect.
Dip switch 2 (SW2)
No.1: ON No. 2: ON ................ English
No.1: ON No. 2: OFF .............. French
No.1: OFF No. 2: ON ................ Japanese
[German: 220V]
No.1: OFF No. 2: OFF .............. Spanish
Setting the Safety Key Function
• As mentioned on page 10 of the "Start Guide," open the con-
trol unit and change the settings.
• When the no. 1 switch of dip switch 1 (SW1) is ON, the safety
function is activated. When the no. 1 switch is turned OFF, the
function is canceled.
• Switches no. 2, no. 3, and no. 4 are not used.
• After changing the dip switch settings, turn the power off and
back on again for the change in settings to take effect.
Dip switch 1 (SW1)
No. 1: ON Safety key function activated
No. 1: OFF Safety key function canceled
ON
1 2 3
4
DIP
ON
1 2 3 4 DI P
Dip switch 1
Dip switch 2