background image

Page 19  — English

WARRANTY

Thank you for purchasing this pressure washer. Below is our prod-

uct warranty. Before submitting a warranty claim, we suggest you 

read the Operator’s Manual that came with your pressure washer. 

You may discover an easy and simple solution to your problem. 

If you cannot find the manual, a replacement can be obtained by 

calling the number below, or by downloading one from our web 

site at the address below. This product is manufactured on behalf 

of and distributed by Techtronic Industries North America, Inc. 

The 

Cat Pumps

®

 Logo is the trademark of Cat Pumps and is used 

under license by Techtronic Industries North America, Inc. All 

warranty communications should be directed to Techtronic 

Industries North America, Inc., attn: Pressure Washer Techni-

cal Service at (toll free) 1-877-202-1480.

WHAT THE WARRANTY COVERS

LIMITED 3 YEAR WARRANTY: 

This pressure washer is war-

ranted to be free from defects in material and workmanship for 

a period of three years after date of purchase, subject to certain 

exceptions and limitations stated below. 

LIMITED LIFETIME SEALS FOR LIFE PROGRAM: 

Pro-

vided you have registered your pressure washer purchase at  

www.bluepowersite.com, the high pressure seals on your pres-

sure washer are warranted for as long as you own the pressure 

washer. This warranty is limited to replacement of no more than 

one set of seals per calendar year. 
The warranty period begins on the date of purchase. The war-

ranty applies only to pressure washers purchased from an au-

thorized retailer in the U.S. or Canada, extends to the original 

purchaser only and is not transferable. 

We cannot honor any 

warranty claims without

 a prior successful registration of 

the product. If your warranty claim is approved, you may be 

required to return any defective part, which will be repaired or 

replaced without charge. If a part is no longer available, the part 

may be replaced with a similar part of equal function. Repair or 

replacement of parts does not extend the warranty period. Re-

pair or replacement of parts is your exclusive remedy under this 

limited warranty. Warranties for other products may vary. Go to  

www.bluepowersite.com for more information.

WHAT THE WARRANTY DOES NOT COVER

This warranty does not cover damage caused by any of the 

following:

  Failure to assemble, use or maintain the power washer in ac-

cordance with the assembly instructions and Operator’s Manual 

or any other misuse or abuse or failure to follow local codes

  Misuse, alteration, abuse, accidents or failure to maintain water 

pressure in accordance with instructions

  Apartment complex or other community use by rental of the 

pressure washer or otherwise

  Unauthorized modification or repair of the pressure washer or 

use of unauthorized parts

 Acts of God such as fire, flood, hurricanes, lightning, wind, 

freezing weather and hail, thermal expansion or scale build up

 Cleaners other than those recommended in the Operator’s 

Manual or exposure to chlorine or other chemicals either 

directly or in the atmosphere 

  Incidental, consequential or special damages

  Scratches, dents, discoloration, surface rust or other cosmetic 

issues or damages

  Normal wear and tear which has exhausted the useful life of 

a part such as a high pressure hose, spray wand, nozzles, 

trigger handle, supply hoses, quick couplers, gaskets, valves, 

pistons, pump valve assemblies, o-rings, water and oil seals. 

(This exclusion is not applicable to the high pressure seals.)

 Any consumable accessories provided with your pressure 

washer 

  Failure to maintain adequate water supply in accordance with 

the Operator’s Manual

  Postage, pickup, delivery or other transportation costs

  The cost to remove or install any high pressure seals, com-

ponents, or other labor charges as part of the Seals for Life 

Program

The gasoline engine on this pressure washer is separately war-

ranted by the engine manufacturer and is serviced through the 

engine manufacturer’s authorized service center network. Cat 

Pumps and Techtronic Industries disclaim any and all express or 

implied warranties with respect to the gasoline engine.

THIS LIMITED WARRANTY IS THE SOLE EXPRESS WAR-

RANTY PROVIDED BY TECHTRONIC INDUSTRIES NORTH 

AMERICA, INC. EXCEPT TO THE EXTENT PROHIBITED BY 

LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO 

THE DURATION OF THE ABOVE THREE-YEAR WARRANTY. 

NO RETAILER OR OTHER PARTY HAS ANY AUTHORITY TO 

CREATE ANY OTHER WARRANTY OR ADD TO OR VARY THIS 

LIMITED WARRANTY. TECHTRONIC INDUSTRIES NORTH 

AMERICA, INC.’S MAXIMUM LIABILITY IN ANY EVENT UN-

DER THIS WARRANTY WILL NOT EXCEED THE PURCHASE 

PRICE PAID BY THE ORIGINAL PURCHASER.

Note that some states, provinces or other jurisdictions do not 

allow exclusion or limitation of incidental or consequential dam-

ages or limits on how long an implied warranty lasts. Some of 

the above limitations therefore may not apply to you. This limited 

warranty gives you specific legal rights. You also may have other 

rights that vary from jurisdiction to jurisdiction. 
This warranty applies to product sold in the U.S.A. and Canada only.

HOW TO OBTAIN SERVICE

To obtain service for this pressure washer you must return 

it, freight prepaid, to Techtronic Industries North America, 

Inc. or take it in to a manufacturer- authorized service cen-

ter for pressure washers. All warranty claims must be made 

within the warranty period. You may obtain the location of 

the authorized service center nearest you by calling Cus-

tomer Service at the number shown below or by logging on to  

www.bluepowersite.com. When requesting warranty service, you 

must present the original dated sales receipt. The authorized 

service center will repair any faulty workmanship, and either repair 

or replace any part covered under the warranty (

not including 

seals

), at our option, at no charge to you. For seals see 

Limited 

Lifetime Seals For Life Program

Before returning any parts or components to Techtronic In-

dustries North America, Inc., please contact Customer Service 

at the number shown below. Please have available the pres-

sure washer’s serial number (located on the Data Rating Plate  

Label) and a copy of your sales receipt showing your date and 

place of purchase. Returns will not be accepted without a valid 

return authorization number (RAN) from Customer Service. You 

will be responsible for paying shipping charges, and you must 

return the defective part freight/postage prepaid with the RAN 

shown on the outside of the package. Returns that do not meet 

these requirements will be refused. We will return a replacement 

part to you freight/postage prepaid. 

Customer Service: (toll free) 1-877-202-1480

Techtronic Industries North America, Inc.

1428 Pearman Dairy Road
Anderson, SC 29625

Pressure Washer Limited Warranty

Содержание CT80020



































































Отзывы: