21
Hood
(illustration 18)
The hood is fastened to the seat, only the upholstery may be taken off to be washed.
•
Follow the washing instructions printed on the care label of the hood.
Undo the zip on the front part of the hood and unfasten the Velcro on the sides (fig. 18).
•
Unfasten the two clips and the Velcro on the back of the pushchair backrest.
•
To fit the upholstery back on follow the same steps in reverse.
•
Folding
(illustration 19-20)
NOTE: The Kudu can be folded with or without the seat.
WARNING: The Kudu can not be folded with the complements (Prima easy, Prima
fix, Playmoon, Mako, Metropol. Baby zero plus, Newmoon or Sono).
Folding
with the seat facing forwards (illustration 19)
Fold the hood.
•
Move the backrest forwards.
•
Place the seat backrest in the folding position.
•
Slide the two catches on the sides of the handlebar.
•
Push the handlebar forwards.
•
Lastly, fold the rear part of the pushchair.
•
Folding
in the reverse position with the seat facing backwards
(illustration 20)
Fold the hood and put the backrest in the horizontal position.
•
Slide the two catches on the sides of the handlebar.
•
Push the handlebar forwards.
•
Fold the rear part of the pushchair.
•
Fasten the locking device.
•
Fitting the rain cover
(illustration 21)
NOTICE:
THIS RAIN COVER SHALL NOT BE USED ON A PUSHCHAIR NOT FITTED
WITH A CANOPY TO INSTALL IT.
Unfold the hood.
•
Place the rain cover on top of the Kudu, take care when fitting the rain cover to make
•
sure that the openings are at the back of the pushchair.
Pass the handlebar through the openings and fasten the Velcro strips.
•
Lastly, fasten the two Velcro strips to the basket.
•
