20
Adjusting the armrest
(illustration 11)
Press the side buttons on the inside of the armrest, and pull the armrest backwards or
•
forwards to the required position (fig. 11).
The armrest has a position while in use. It will click when correctly in place.
•
Changing the direction the seat faces
(illustrations 12-13)
WARNING:
NEVER ADJUST THE SEAT (CHANGING THE DIRECTION IT FACES AND
FITTING OR REMOVING IT) WHILE THE CHILD IS SITTING IN IT.
Put the parking brake on.
•
Press the buttons on both sides of the seat. Next, pull the seat upwards (fig. 12).
•
Install the seat in the required position, when correctly fitted it will click into place (fig. 13).
•
The child can now sit in the seat.
•
Adjusting the footrest
(illustration 14)
The angle of the footrest can be adjusted for the child’s comfort.
•
Hold both ends of the footrest and raise it to the required position
•
Press the buttons on the sides and lower the footrest to the required position.
•
Safety strap
(illustration 15)
To use the strap, fit it to your wrist.
•
Adjusting the safety harness
(illustration 16)
Put the parking brake on and check that the safety harness is unfastened before
•
seating the child.
Position the child in the seat and fasten all the parts of the fastening buckle: chest
•
straps and crotch strap.
Lastly, adjust the chest straps of the harness and the abdominal belt to fit the child properly.
•
Adjusting the backrest
(illustration 17)
The backrest has 3 reclining positions. Pull the lever of the reclining system upwards,
•
and move the backrest up or down as required, once the required position has been
selected, release the lever
The backrest also has a reclining position suitable for folding the Kudu. Pull the reclining
•
system lever upwards and move the backrest forwards as far as it will go.
