Freeway DSL User’s Manual
2.2 Ports and Buttons
The rear panel contains the ports for the Freeway DSL's data and power connections.
DSL:
Connecter for accessing the Internet through ADSL line.
LAN1-4:
Connector for Ethernet network devices, such as a PC, hub, switch or router.
USB:
Connector for USB drive or Flash drive.
POWER:
Connecter for a power adapter. Using a power supply with a different voltage rating
will damage this product. Make sure to observe the proper power requirements. The
requirement of adapter is 12 AC/ 1A.
ON/OFF:
Power on/off your Freeway DSL.
Reset:
Restore the default settings. You may need to place the Freeway DSL into its factory
defaults if the configuration is changed, you loose the ability to enter the Freeway DSL via the
web interface, or following a software upgrade, and you loose the ability to enter the Freeway
DSL. To reset the Freeway DSL, simply press the reset button for more than 8 seconds. The
Freeway DSL will be reset to its factory defaults and after about 30 seconds the Freeway DSL
will become operational again.
3