Freeway DSL User’s Manual
1. Introduction
The FREEWAY DSL is an ADSL2+ router which integrates a 4-port Fast Ethernet Switch,
Wireless AP and File Server. FREEWAY DSL provides high speed ADSL2+ broadband
connection and sharing it with up to four computers via the LAN ports and 32 computers via
the WLAN. The Router is compatible with ADSL, ADSL2, and ADSL2+ lines for worldwide
ADSL deployment. FREEWAY DSL supports robust QoS and IGMP features to ensure high
quality triple play. Consider the application of home networking and sharing of file and printer,
FREEWAY DSL supports easy-to-use file server.
FREEWAY DSL adopts easy-to-use web-GUI management interface. Its user friendly
interface will amaze you with total difference experience. FREEWAY DSL also supports TR-
069 (CPE WAN Management Protocol) which enables central management from the central
offices and benefits the ISP much.
1.1 Features
Comply with ITU ADSL, ADSL 2 and ADSL2+ standards
Comply with IEEE802.3/802.3u 10/100 BASE-T standards
Comply with IEEE802.11b/g Wireless LAN standards
Integrate ADSL router and wireless AP (Access Point) together
Enables sharing of broadband Internet connection
Easy to use Samba file server for mass storage file sharing
Security supports WPA/WPA2-PSK, & 64/128-bit WEP Encryption
Double firewalls: NAT and SPI
Built-in DHCP server
MAC address filtering
VPN pass-through
Web-based advanced user interface
Universal Plug and Play (UPnP)
Support TR-069 for central management
Remote / Local configuration & management through Web / Telnet configuration &
management
1.2 System
Requirement
In order to use the Freeway DSL, you must have the following:
ADSL service up and running on your telephone line
One or more computers each containing an Ethernet network interface card (NIC)
For system configuration using the supplied web-based program: a web browser such as
Internet Explorer v 5.0 or later, or Netscape v 6.1 or later.
1