CastleNet Freeway DSL Series Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 51

CastleNet Freeway DSL Series Скачать руководство пользователя страница 42

Freeway DSL User’s Manual

4.8.2 Backup/Restore

This page allows you to backup current settings to a file, or restores the settings from a file
which was saved previously. Besides, you could reset the current configuration to factory
default. This is the same function as you press the Reset button on the rear panel for more
than 8 seconds.

To save settings to a file, just click the

Save

button to save the file to a local drive.

To load settings from a file, please follow the following instructions:
1. Click

the

Browse

button to select the saved file.

2. Confirm

your

selection.

3. Click

the

Upload

button to start restoring.

To reset all the current settings, just click

Reset

button to reset all settings to default value.

This is the same as you push the

Reset

button on the rear panel of Freeway DSL.

IMPORTANT!

Do NOT power off the Freeway DSL or press the Reset button while this

procedure is in progress.

39

«
...
40
41
42
43
44
...
»

Содержание Freeway DSL Series




















































Отзывы:

Нет отзывов