15
Fig.26
Fig.27
⚫
If there is tube in the tire, remove it.
⚫
Lift wheel, make the bottom edge of wheel as
Fig. 25.
⚫
Press pedal D until bottom edge of wheel fall
off
.
⚫
Depress pedal A, tilt column, take off wheel,
and finish demounting
.
NOTE
：
Keep hands and the rest of human body away
from the moving parts of the machine. Never wear
necklace, bracelet or loose clothes when operating
the machine as it may cause danger!
4.3
Mounting Tire
NOTE
：
Check the size of tire and rim to see if they match each
other
.
⚫
Clamp the rim tightly in the same way as demounting
tire.
⚫
Use lubricant such as thick soap solution on the tire
and the rim.
⚫
Put the bead on the rim with the left side upward, press
pedal A, make column back to working position
(Fig.26) .
⚫
Check the coordination of mount/demount head and
rim. Readjust if necessary.
⚫
Adjust relative position between the tire and the
mount/demount head to make the tire bead cross the
mount/demount
head.
At
the
end
of
the
mount/demount head, the tire bead should be placed
on the mount/demount head (Fig.27-A). At the
beginning of the mount/demount head, the tire bead
should be placed under the ball protuberance of the
mount/demount head (Fig.27-B).
⚫
Press down the central part of the tire. Depress the
pedal D (Fig.22) to turn the turntable clockwise,
making the lower tire bead fall into the rim groove
completely (as fig.28-A).
Fig.24
Fig.25
Содержание CASC506
