Castelle 61-1273-001, Инструкция по интерфейсу

Страница: 41 / 62

Installing the FaxPress Xerox Interface
5—3
Installing the FaxPress Client Software
The procedures in this section assume that you have met the
requirements listed in
System Requirements on page 1-4
.
Before you can install the FaxPress Xerox Interface software, you must
have the FaxPress Client installed on the Windows workstation you
intend to use as your FaxPress Xerox Interface.
See your FaxPress Administrator’s Guide for Client software installation
details.
Creating FaxPress Users for Each Fax
Repository
Before you can map Xerox users to FaxPress users in order to connect to
and use the Fax Repository folder you created in
Creating the Fax
Repository Folder on page 2-3
, you must create the appropriate
FaxPress users. One naming scheme that makes sense, especially if you
have more than one Xerox system, and therefore, more than one Fax
Repository folder, is to give the FaxPress users names that relate to the
names of the Fax Repository folders. For example, if you have named the
Fax Repository folders XeroxDrop1, XeroxDrop2, etc., you can name
your FaxPress users Xerox1, Xerox2, etc. Remember that these same
names must be used as the Xerox User names when you do your user
mapping for the FaxPress Xerox Interface, as described in
Configuring
the FaxPress Xerox Interface on page 5-9
. For details on adding
FaxPress users, see the FaxPress Administrator’s Guide.