background image

 
Maintenance, Errors, Repair 

REFLECTA/5

 

Page D5 

Mounting & Operations Manual 

Workshop Repair of Compass 

 

Compass repair should be carried out by qualified compass workshops only to grant safe navigation!  

 

Repair or exchange by a refurbished compass? 

In case certificates have to been renewed or a replacement compass is necessary Cassens & Plath offers an 
exchange service of refurbished compasses. Contact: 

[email protected]

. State type of compass, serial 

number, flag or required certificate, any detector fixed to the compass, date of last certificate & date of last 
compass adjustement. C&P will send a refurbished compass to the next available stopp of the vessel and 
invoice. The ship may return to C&P the old compass and we will buy it back. The ship will have a pay back 
after inspection of the returned compass.  
 
Spare Parts 
(In case of order please quote part description and also type of compass -here steering- (optional reflector-) 
compass Type 21) 
 

 

 
 
Compass Fluid 
If less then 5 cm

3

 fluid has to be completed use pure Ethanol or distilled water. If it is more, only use original 

Cassens & Plath compass fluid #39012.  
Don´t use any different fluid because this may destroy the compass and impair the function! 

Alterations / Errors reserved 
Cassens & Plath GmbH, Am Lunedeich 131, 27572 Bremerhaven, Germany, Tel. +49 471 483 999 0, Fax +49 471 483 999 10 

www.cassens-plath.de

, [email protected]

 

Содержание Reflecta/5

































Отзывы: