— 15 —
4-12. Expansion Slot
The QT-7300 provides a free PCI expansion slot to accommodate a PCI device at a given time. The expansion
card can be plugged into the riser card which is plugged in the onboard PCI/ISA slot as standard. Due to the
compact space design, a half-size expansion card can be adapted. To use the PCI expansion, follow the
installation instructions below;
1. Unscrew the metal slip located inside the expansion outlet.
2. Plug a PCI card into the PCI slot on the riser card and fix the expansion card by screwing it to the metal front
compartment. All the connectors of the expansion card will come out from the expansion outlet on the bottom
side of the chassis for further cable connection.
4-13. System O/S and Software Installation
The QT-7300 is not equipped with any operating system. It builds in a 2.5" HDD as memory storage device. As
both devices are built in the system chassis, to load Win98/Win98SE or Win2000 O/S or application software
into the system, an external device is needed to act as a bridge. There are three major ways to load software
into the system.
1. Use an external FDD:
Attach a 3.5" FDD to the external FDD port via the provided external FDD
cable. The 26-pin FDD connector is to be plugged in to the system FDD
connector; the 34-pin standard 3.5" FDD signal connector and the 4-pin FDD
power connector are to connect to the standard 3.5" FDD. Then, configure the
system BIOS setup and insert a 3.5" disk containing necessary software and
start the installation.
2. Use Ethernet:
After install the O/S and necessary network utilities, download application
software from the network.
3. Use External CD-ROM/HDD: To use an external CD-ROM or HDD for software installation, an optional P-
IDE device is needed. The P-IDE device is a converter to convert the parallel
port to the IDE interface.
Содержание QT-7300 Series
