Casio fx-7400G PLUS Скачать руководство пользователя страница 125

Страница: 125 / 218

111

Statistical Graphs and Calculations

Chapter 7

• Only positive data can be included in a stacked bar chart. Attempting to draw a

stacked bar chart for a list that includes negative data causes an error (Ma ER-
ROR).

• A stacked bar chart cannot be superimposed with another graph.
• View Window settings are not applied to stacked bar charts.

• The following display shows what happens if you perform a trace operation (

(TRCE)) while a stacked bar chart is on the display.

• Pressing

and

moves the highlighting up and down within the same graph.

• If you have multiple stacked bar charts on the screen, use

and

to move

between them.

Linking the Segments of Stacked Bar Charts with Connecting Lines

While multiple stacked bar charts are on the display, press

(CNCT) to link

their segments with connecting lines.

Redraw the stacked bar charts to clear the connecting lines.

Bar Graph

From the statistical data list, press

(GRPH) to display the graph menu, press

[

(SET), and then change the graph type of the graph you want to use (GPH1,

GPH2, GPH3) to bar graph.

Press

to draw the graph.

P.101

(G-Type)

(Bar)

(TRCE)

Содержание fx-7400G PLUS



























































































































































































































Результаты поиска

Содержание fx-7400G PLUS

Отзывы:

Casio fx-7400G PLUS, Руководство пользователя, Страница: 125 / 218

Результаты поиска

Содержание fx-7400G PLUS

Отзывы: