93
Using BEST SHOT
You can register up to 999 setups, based on snapshots shot with the camera, as
“Custom Shot” scenes. Selecting a registered “Custom Shot” scene configures the
camera with its settings. The setups of snapshots recorded with the following modes
and features can be registered as “Custom Shot” scenes.
– Program Auto
– A Mode
– S Mode
– M Mode
– BEST SHOT (Excluding “Prerecord (Movie)”, and “HDMI TV Output”)
.
To register a “Custom Shot” scene
1.
In the BEST SHOT Mode, select “Custom Shot (Register User Scene)”
(page 89).
2.
Use [
4
] and [
6
] to select the snapshot whose setup you want to save.
3.
Select “Save”, and then press [SET].
Your scene will be assigned the name “Custom Scene”, along with a scene
number.
NOTE
• A movie setup cannot be registered as a “Custom Shot” scene.
• You can check the settings of the currently selected “Custom Shot” scene by
displaying the camera’s setting menus and looking at its settings.
• “Custom Shot” scenes are assigned numbers in the sequence: U1, U2, and so on.
• The following are the settings that are saved for each “Custom Shot” scene.
Face Detection, Focus, Exposure, White Balance, Flash, ISO, Metering, Lighting,
Flash Intensity, Sharpness, Saturation, Contrast
• “Custom Shot” scenes are stored in built-in memory (page 191) in the SCENE
folder (snapshots).
• Formatting the camera’s built-in memory (page 201) deletes all user “Custom Shot”
scenes.
• Use the following procedure when you want to delete a “Custom Shot” scene.
Display the information screen (page 91) of the user BEST SHOT scene you
want to delete.
Press [
2
] (
), select “Clear”, and then press [SET].
Creating and Using Your Own Setups (Custom Shot)
