67
Snapshot Tutorial
NOTE
• After shooting a snapshot, the camera will return to standby. Any one of the
following will cancel a Motion Shutter operation.
– Shooting 30 Motion Shutter snapshots
– Pressing the shutter button during standby
– Tilting the monitor screen
– Rotating the camera
• The camera’s Sleep function and Auto Power Off function are disabled during
Motion Shutter standby.
• The Motion Shutter may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
•
(preview icon) will appear on the monitor screen when a snapshot is shot.
When the camera detects movement in the vicinity of the preview icon, it will
display the image that was shot for three seconds.
• “
O
Tracking” cannot be selected for the AF area setting while shooting with the
Motion Shutter. If “
O
Tracking” is selected in another mode, selecting the Motion
Shutter will cause the AF area setting to change to “
U
Spot” (page 117).
• You cannot shoot a snapshot by pressing the shutter button while movie recording
is in progress (Snapshot In Movie).