17
2. Hardware Specifications
2.1 DT-X10
Table 2.1
Item Specification
Remark
CPU, Memory
CPU
Intel PXA255 Application Processor
Operating clock; 300 MHz (Max.)
Operating system
Microsoft WindowsCE .NET 4.1
RAM 32
MB
FROM
64 MB (user area 30 MB)
Scanner
Method
Semi-conductor laser light
Laser emitting window
Direct
Laser light wave length
650±10 nm
Output of the light
< 1 mW
No. of scannings
100±20 times per second
Resolution 0.127
mm
(Minimum)
PCS
0.45 or greater
Print Contrast Signal
Depth
40 to 300 mm
Maximum 30 mm (at the depth 40 mm)
Readable width
Maximum 238 mm (at the depth 300 mm)
External disturbed light
50,000 Lux or less under the sunlight
Readable symbologies
UPC-A, UPC-E, EAN, NW7, Code39,
Code93, Code128, EAN128,
Interleaved2of5, MSI, IATA. ITF
Display
Display device
3.5-inch 2-way TFT color LCD
No. of dots
240 (w) x 320 (h)
Dot pitch
0.22 (w) x 0.22 (h) mm
Backlight LED
Display font type
Scalable fonts
See note 1
Indicator
Confirmation /Status
LED (in red/green) x 2 pcs
Left: Programmable
Right: Battery charge status
Input
Keyboard
See Chapter 1.3 “General Guide”.
Trigger key
2 keys ( left and right sides)
Touch panel
Plastic panel (Resolution 240 x 320)
Possible to display character input pad
IrDA interface
Standard
IrDA Ver. 1.1 compatible
Communication method
Half duplex
Synchronization Start/Stop
bit
Baud rate (bps)
9,600, 115,200, 4M
Communication range
0 to 1 m (Maximum 25 cm at 4 Mbps)
Bluetooth
Standard
Bluetooth® Specification Ver. 1.1
Communication range
3 m
Depending on the surrounding
conditions
Output
Maximum 3 dBm (PowerClass2)
Continue.
