background image

                                                                                                 
 

 

43 

 

 

About the battery pack 
1.

 

Do not place the battery pack in a microwave oven or high-pressure container. If this is done, the 
battery pack will be quickly heated or the contact seal may be broken causing it to become hot, 
smoke, explode, or ignite. 

2.

 

If you are aware of an abnormal condition such as a smell, excessive heat, discoloration, deformation, 
etc., during use, charging and storage of the battery pack, immediately remove it from the IT-700 and 
do not use it anymore. If it continuously used without proper treatment, the battery pack may 
become hot, smoke, explode, or ignite. 

3.

 

If charging cannot be completed even after the specified charging period, stop the charging operation. 
Otherwise, the battery pack may become hot, smoke, explode, or ignite. 

4.

 

If the battery pack leaks or generates an abnormal smell, immediately remove it away from the fire. 
Otherwise, the electrolyte that has leaked may ignite causing smoke, an explosion, or fire. 

5.

 

Do not disassemble the battery pack. Neither disassemble nor retrofit this terminal. Personal burns or 
injury may occur. 

 

 

About the power cable and AC adaptor 

1.

 

Do not bring the power cable close to heating equipment such as stove. The cable coating may burn 
or melt, resulting in fire or electric shock. 

2.

 

Do not bring the power cable close to a container filled with liquid. If the cable becomes wet or 
should the container be tipped over, a fire or electric shock may result. 

3.

 

Do not unplug the AC adaptor by pulling the power cable by hand. The cable may be damaged 
causing a fire or electric shock. Always hold the AC adaptor itself. 

4.

 

When this terminal is not used for an extended period of time, e.g. during absences, unplug the AC 
adaptor from the wall outlet. 

 

 

About the battery 
1.

 

Do not attempt to disassemble or solder the battery. Also, do not heat or throw the battery into a fire. 

2.

 

When the button-type battery used in this terminal is removed, exercise care so as not to accidentally 
swallow it. Remain aware of the danger to infants. Store the button-type battery in an infant-safe 
location. Should the battery be swallowed, immediately consult a doctor. 

3.

 

If the battery is improperly used, the electrolyte may leak and soil other objects, resulting in fire and 
personal injury. Be sure to observe the following precautions: 

4.

 

Make sure of the polarity (+, or -) of the battery when installing it. 

5.

 

Do not leave this terminal unused for an extended period of time with the battery installed. 

6.

 

Only use the battery specified for the DT-X10. 

 

 

About the battery pack 
Do not use the battery pack in a place where it will be exposed to static electricity. The battery pack may 
become hot, explode, or ignite. 

 

 

Avoid exposing it to water and foreign matter 
Should foreign matter (metal chips, water, liquid chemicals) enter inside the product, immediately turn off 
the DT-X10, remove the battery, unplug the AC adaptor, then contact a CASIO distributor. 

Содержание DT-X10 series













































Отзывы: