background image

                                                                                                 
 

 

42 

 

 

When charging the battery pack use only the dedicated AC adaptor supplied from CASIO, at a 
temperature between 0

°

C and 40

°

C. If the battery pack is charged with chargers other than those specified 

by CASIO, it may be over-charged, or charged with an excessive current, or have abnormal chemical 
reactions induced, causing it to become hot, smoke, explode, or ignite. 
 

 

The battery pack has a specific polarity. Do not force it into the DT-X10. Check the polarity. If the battery 
pack is connected backwards, it can be incorrectly charged and have an abnormal chemical reaction 
induced, causing it to become hot, smoke, explode, or ignite. 
 

 

If the internal electrolyte of the battery pack leaks and enters the eye, do not rub the eye. Rinse the eye with 
a sufficient amount of clean water, such as tap water, then immediately consult with a doctor. The 
electrolyte can cause eye damage. 
 
 

7.2.2   General 

 

 

Be aware of abnormal conditions. 
If the DT-X10 is continuously used in an abnormal condition, a fire or electric shock may occur. If there is 
an abnormality, immediately turn off the Power switch, and be sure to remove the batteries and unplug the 
AC adaptor from the wall outlet, then contact a CASIO distributor for repair. 

 

 

Supply Current/Voltage   
Do not use the AC adaptor with an AC voltage other than that indicated. Also, avoid drawing power from 
an outlet used for multiple devices. This may cause fire or an electric shock. 

 

 

Handling the power cable 
Do not damage, break, retrofit, bend, twist, or stretch the power cable. Also, do not place a heavy object on 
it or heat it. If this is done, the power cable may be broken and cause a fire or electric shock. 

 

 

AC adaptor 
Always use the dedicated AC adaptor. If an AC adaptor that is not specified is used, the battery pack may 
explode, causing a fire or personal injury.     

 

 

Do not touch the AC adaptor with wet hands. 
This may result in an electric shock. Also, place the AC adaptor in a place where it is not subject to dust 
and water. Dust and dirt may cause fire and smoke, and water may cause an electric shock. 

 

 

About the electrolyte 
If the internal electrolyte of the battery leaks and enters the eye, rinse it with a sufficient amount of water, 
then consult with a doctor 

Содержание DT-X10 series













































Отзывы: