13
1.3.2 DT-160IOE (Bridge Satellite Cradle)
Views
Table 1.5 Names of parts
No. Part
Name
Description
1
USB port
This port accepts connection of a USB cable for connection to a computer
for transfer of system data and file data. Use of the USB port requires
installation of a special driver on the PC.
2
RS-232C port
This port accepts connection of an RS-232C cable for connection to a
computer for transfer of system data and file data. Use of the RS-232C port
requires installation of a special driver on the PC.
3
RS-422 port
This port is used when connecting to another Bridge Satellite Cradle.
4
AC adaptor jack
Connect the AC adaptor here.
5 Wall
mount
unit
fastening plate
The holes in this plate accept screws that secure the wall mount unit in place.
6
Terminal detect switch
This switch detects when the Handheld Terminal is not seated correctly on
the Bridge Satellite Cradle.
7
IR port
This port transfers data with the Handheld Terminal IR port non-contact data
communication.
8
Power supply terminals Power is supplied to the Handheld terminal via these contacts.
Continue.
Fig. 1.4
Back
Top
Front
Right
Bottom
